content is empty!
Pre-despatch Insepction Before Shipment As Optional
A. Venue: factory location in Yantai China
1. Buyer bears costs of airfare and hotel accommodation.
2. Seller is responsible for local transportation, hotel
accommodations and meals.
3. Seller shall notify buyer in writing 14 days in advance
to arrange for buyer to travel to Yantai for this inspection.
B. Acceptance Tests
1. Functional and Specifications Tests/inspection
These tests are to qualify each part of the machine, or machines by
verifying their functions. If possible, they will be done in a“ dry”
(w/o material/product being produce) mode. Each portion of
machine/components will be qualified individually. The
followings will be inspected and tested:
(1) Design per specifications
(2) Materials per specifications
(3) Functions per specifications
(4) Workmanship
2. Acceptance Test Run (ATR)
The ATR is to qualify the complete line. It is done by running the
complete line: premixed raw material fed in from IBC to extruder
feeder, and test product output from the sieve under the following
conditions:
a) Test Product: A Standard white powder as per customers’ request
b) Test Duration: up to the customers’request
c) Test Line Speed: approaching normal speed
d) Acceptance criteria
(1) No unexpected machine deficiency related
interruption. If such interruption occurs during the
run, the ATR must be restarted from the beginning
after the deficiency is corrected.
(2) Product produced must meet related r specifications:
(a) Surface finish
(b) Mechanical properties
(c) Particle size distribution
(d) If this test is run on a site where testing
equipment is not available, determinations by the
customer running this test using visual and subjective tests is final.
(3) Process yield must be at a minimum of 98%
3. Color Change
a) A full color change including completely cleaning
the system is to be demonstrated
(1) Any unsatisfactory color change feature will be
recorded and an action plan derived
4. Re-start to run a different color (such as blue, to be
determined by buyer) Primid powder
a) Color cross contamination will be inspected
b) Acceptance criteria
(1) No color cross contamination or not etc.